Dermatology Surgical Fractional Co2 Laser Scan And Cutting Device

1. Dermatology Surgical Fractional Co2 Laser Scan And Cutting Device

The CO2 laser treatment instrument adopts a sealed-off CO2 laser and outputs an invisible infrared laser, which is characterized by thin beam and high energy density.

The laser output from the CO2 laser treatment device is transmitted through the light guide arm and is equipped with various cutter heads for various purposes.

When the carbon dioxide laser beam is output through the focusing mirror, the high temperature generated by the focusing point can vaporize the target tissue and can be used for cutting and cauterizing;

The carbon dioxide laser is output (directly) without a focusing mirror, and the energy density is low, and the target tissue can be coagulated;

The carbon dioxide laser therapeutic apparatus such as a laser beam is output through a beam expander, and the laser beam is diffused and amplified for irradiation.

2.Dermatology Surgical Fractional Co2 Laser Scan And Cutting Device Features

1). The computer pre-sets the laser output power; the power can be preset;

2). Computer controlled output mode: continuous, single, repeated pulse, super pulse optional, can meet different surgical needs;

3). Red indicates the laser, there are three working modes, such as pulse, continuous, and aiming when there is surgery, which makes the field clearer;

4). Safe automatic detection, and 9 kinds of fault status are displayed by numbers to ensure safety and convenient remote maintenance;

5). It has a blowing function to protect the output lens from contamination and cool the target tissue;

6). 7 joint light guide arm, flexible operation

3.Dermatology Surgical Fractional Co2 Laser Scan And Cutting Device operation

1). First open the water circulation system and check whether the water flow is smooth. If the water circulation system is faulty, it must not be turned on.

2). The patient takes the appropriate position and exposes the treatment area or site.

3). Check whether the buttons of each machine are in the zero position, turn on the power, turn on the low voltage and high voltage switches in turn, and adjust to the optimal working current of the laser.

4). Slowly adjust the laser, depending on the needs of the treatment. For laser moxibustion, a defocus lens is used and the power density is adjusted to 100~200mW/cm. The thick layer of the stratum corneum may be slightly higher but should not exceed 250 mW/cm. The irradiation distance is 150~200cm, which is suitable for local comfort and warmth. Do not overheat, treat each treatment for 10~15min. For scar moxibustion, use a focusing lens with a power density of 250~477mW/cm.

5). At the end of the treatment, press the various buttons in the reverse order of power on. However, it should be noted that the water circulation should not be closed within 15 minutes of shutting down the unit.

4.Scar Removal Equipment treatment before and after

5.Dermatology Surgical Fractional Co2 Laser Scan And Cutting Device

Laser rejuvenation (rough skin, large pores, dull skin, light damage, etc.); laser wrinkles (crow's feet, heads up, Chuanzi lines, decree lines); pigmented nevus, epidermal pigmentation spots (freckles, etc.), epidermis (various types of sputum) cutting; scar repair (acne scars, hypertrophic scars, burn scars, depressed scars, etc.); other applications face laser

Laser output mode: super pulse, dot scan, continuous scan, single pulse and repetition frequency pulse

Hot Tags: dermatology surgical fractional co2 laser scan and cutting device, manufacturers China, suppliers, wholesale, low price, price, made in China